The amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB043. The stock end links are weak and can bend or break. BMR’s ELK012 front and rear End Link Kit allows you to push your S550 Mustang to the limit without fear of end link deflection. BMR manufactures the ELK012s out of CNC-machined billet aluminum and heavy-duty steel hex bar stock. The right and left hand threaded ball joint-style tie rods are manufactured by Proforged and offer huge advantages over other companies’ end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. BMR’s ball joints are greasable, which you won’t find on our competitor’s end links. This ensures long life and flawless operation, and they make less noise than rod ends. The ball joints attach to the sway bar with 12mm studs, while the ball joints attach to the end link tubes with ½-inch studs. This combination of components gives you a huge increase in strength over stock end links.
BMR designed the ELK012 sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK012 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links allow for on-car adjustability, giving you the ability to easily correct sway bar geometry and working angles on lowered S550s, as well as cars with adjustable sway bars. The ELK012 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!
BMR Suspension’s ELK012 front and rear sway bar End Link Kit is available in a durable black finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!
FRSport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. FRSport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes: parts such as intake, exhaust, and software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls and other items related to vehicle emmisions.
PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The price of this item includes sales tax reimbursement computed to the nearest cent.Refund Policy
At Damperworks, our goal is to ensure that you’re 100% satisfied with your purchase. If for whatever reason, you are dissatisfied with your purchase, you can return or exchange items with us, subject to certain time and availability limitations.
Shipments with Damaged, Incorrect, or Shortage of Items
If you receive a shipment with damaged, incorrect, or missing items, please notify us within 2 days of receiving the package(s).
- DO NOT THROW AWAY PACKAGING related to a damaged item. If the packaging is discarded, we will not be able to make a damage claim with the carrier.
- If receiving a physically damaged item, please inspect damage in presence of package carrier and make a note of damage. You can choose to keep the shipment in your possession or refuse it due to damage.
- Concealed damage (i.e. damage that you find after opening up the package) must be submitted to Damperworks within 2 business days of receiving the package.
- Please e-mail us at info@damperworks.com to request a damage claim. Please have any supporting documents ready to expedite the claim process, such as photos, Order/Delivery Number, etc.
Returns due to Merchandise Defect
All items sold by Damperworks are warrantied through their respective manufacturers. If you received a defective item, Damperworks will facilitate the warranty process with the manufacturer to get you a replacement part. It is up the manufacturer to make a decision on the claim. Higher end brands usually have less issues and better warranty support, so keep that in mind when making your purchase decision. We have great working, direct relationships with many manufacturers; this ensures that you will get superior warranty support compared to other shops.
If you received a defective item, we can file a warranty claim through the manufacturer, but repair/replacement shall be provided at the sole discretion of the manufacturer/vendor of the product(s). The customer is responsible for all shipping/handling costs associated with item(s) that are warranted.
Warranty
All items sold by Damperworks are warrantied through their respective manufacturers. Please check the item(s) manufacturer for more details.
No warranty will be available if the item(s) are mishandled, abused, or used.
Some item(s) have serial numbers and production numbers to provide a traceable origin and destination and is well documented before leaving our warehouse for warranty purposes.
If you received a defective item and believe a claim is valid, we can file a warranty claim through the manufacturer. Any decision relating to warranty is at the sole discretion of the manufacturer/vendor of the product(s).
The customer is responsible for all shipping/handling costs associated for item(s) that are warranted.
Refused / Undeliverable shipments
Any refused (without damage claim) or undeliverable shipments that arrive back at our facility will incur all related shipping costs including return freight charges and any return-to-sender fees assessed by the shipping carrier. This will be deducted from your product refund.
All international shipments are subject to fees and duties according to the customs law in the destination country.
If an international package is refused and returned to us, the customer is liable for all charges and fees that occur including but not limited to return shipping, customs charges, damages...etc. Please call us if you have any more questions regarding this.
Requests for Refund, Store Credit, or Exchanges
A Return Merchandise Authorization (RMA) number must be requested within 30 days of delivery of the product. Once approved, all returns must be postmarked within 10 days after RMA number issue date.
Any returns without a RMA number will not be accepted.
Returned or exchanged products must be brand new, unused, and uninstalled. Items should have all original manufacturer's packaging, materials, and accessories, including instruction booklets and packing inserts. The original shipping and return shipping cost to send the item back is not refundable.
A restocking fee of 20% will be applied to all returns.
We will not accept returns for any of these types of products:
- Used product
- Special Order items
- Any items marked as Clearance or “Sold As Is”
All pre-authorized returns should be sent to:
DAMPERWORKS RMA
17872 Metzler Lane
Huntington Beach, CA 92647
USA
Guideline for Returning an Item
- Email info@damperworks.com to request an RMA number.
- Some boxes are not suitable for shipping. You are responsible for the return shipping, so any damages arising from poorly packaged returns is your responsibility. A restocking fee may be applicable if the package is returned damaged or deemed unsellable. If you have any questions about this please contact us.
- Write the RMA number clearly on the outer box.
- Shipping costs is your responsibility. We do not accept COD or freight collect shipments. We recommend a shipping method that provides tracking and insurance.
- If you received a label via email, print the label and tape it to the carton.
- Please allow up to five (5) business days after we receive the package for your return / exchange / refund to be processed. An e-mail confirmation will be sent to you once the return is processed.
- International customers: Please mark the item as "VENDOR RETURN" to avoid duties and customs fees.